Some Inflatable Seal are made of material impregnated with silver ion, which prevents bacteriological and microbial growth.
Designing with Inflatable Seal requires the inclusion of a source of compressed gas, which is used to inflate seals in the medical device industry and is often already available on the plant floor, in a laboratory, or medical environment. It is also possible to inflate with liquids rather than gas in demanding applications, and water would be an acceptable inflation media in this sector, although not common. For low-temperature applications, a seal can be inflated with a blend of glycerin and water.
Designing with Inflatable Seal
Seals used on doors and openings should be selected early during product design. In some cases, contact seals may be effective, but they often require substantial force be applied to load the seal, which impacts product design and increases manufacturing cost. Inflatable Seal enables more cost-effective fabrication for two main reasons:
Inflatable Seal is more forgiving because the seal can inflate to close a gap between structural members and achieve equal sealing pressure around the flange if the gap falls within a broad tolerance. For example, an Inflatable Seal will work whether the gap spans 3mm or 10mm. A compression seal or other contact seal will not be effective unless the seal and flange contact each other with great precision, which is difficult to achieve on new equipment. Even a robust and precision-manufactured machine with well-designed flanges will lose some of its geometric integrity as hinges and other components deform or bend over years of use. Throughout the course of the equipment lifecycle, a contact seal will become problematic and may exhibit leakage.
Inflatable Seal enables lighter and more affordable methods of equipment fabrication. The force exerted on the chassis of a piece of equipment means doors and related components must be thicker, perhaps machined instead of welded. These components are typically made of stainless steel, and Inflatable Seal might be attractive due to lowered material costs.
Seals are often exposed to temperature extremes and mechanical stresses, and a well-machined elastomeric Inflatable Seal will maintain its structural integrity and flexibility throughout millions of duty cycles. While silicone is the standard material for Inflatable Seal, new advanced products include materials innovations designed to prolong life and mitigate operational risk. Silicone rubber impregnated with a silver ion helps the material resist bacteria growth.
Another new technology is designed to make silicone rubber less permeable. Silicone is not porous but has the highest permeability of all rubber compounds. If it is immersed in water long enough, there will be some gas that escapes, forming bubbles. Treatments are now available that decrease the permeability of silicone used in an Inflatable Seal, preventing absorption of foreign substances, prolonging the life of the seal, and preventing cross-contamination. The treatment may also result in a seal with a better friction coefficient, ensuring that the seal moves easily in its groove and avoiding any sticking between the surface of the
Advanced design
Once a machinery designer chooses an Inflatable Seal, they must also choose a cross-section that is right for the specific application. Sometimes, the customer seeks high pressure on a large extension to close a wide gap, expects the highest performance, and wants to use a rough, grippe, seal face, even though the application in the pharmaceuticals industry requires a polished face. The elements of this design would place the seal under stress, and consulting a seal manufacturer during the early product design process will ensure the design conforms to the requirements of the industry, the performance characteristics of the material, and the sealing system.
The location of the seal is also important. In washing machines, for example, bottles, vials, or other glass objects can break and cut the seal so proper location of the seal can mitigate against damage. In other cases, improper seal location can cause retention of a product or other material in the groove of the seal, even if it is a lip seal with a smooth surface. Avoiding retention becomes important when using a cross-section like an accordion seal, where designers need to avoid retention of material, water, or even drops of liquid or condensation in the seal itself.
More than just closure
Inflatable Seal are most often used to seal openings, but they can also be used in designs such as an airlifting bag or in other settings to initiate or halt motion. In a surgical theater, for example, lights extending from the ceiling need to be positioned and repositioned securely by the surgeon, and a manufacturer may use an engineered length of an Inflatable Seal to lock the light in place. The surgeon can press a handle to deflate the seal, and as soon as he or she releases the handle, the seal will re-inflate and lock the light into position. This also offers a cushioning action because the seal absorbs vibrations in the building that may be caused by foot traffic, equipment on the floor above, or nearby vehicle traffic.
Conclusion
Inflatable Seal should be at the top of the medical designer’s list for a broad class of equipment. Reduced pressure requirements allow for lower cost fabrication methods because the equipment can be less robust and need not hold precise flange tolerances throughout its lifecycle. They work as equipment falls out of specification during its lifecycle, and new innovations in silicone material design can help reduce risk of contamination and meet regulator demands. Involving the sealing system manufacturer in the early stages of design is crucial to ensuring optimal performance of the equipment, and the supply chain management practices of the vendor should be subject of careful due diligence.
Source:http://www.todaysmedicaldevelopments.com/article/how-to-design-with-inflatable-seals/
